TJSH-65 Gantry frame high speed precision press

Main technical parameters:

Dimention:

FAQ

What to do if the punch machine stops and fails

When the punch press needs to be stopped after completing the work, it is found that it cannot stop normally, that is, the stop fails. This situation is still relatively dangerous for the operator, and it will also affect the quality of the parts processed. So what should you do if you encounter a stop failure? What to do? We must first find out the cause before we can develop a solution.

1. If the line is damaged or disconnected, the punch can be replaced with a new line and the screw can be tightened.

2. The second fall occurs, and the second fall is resolved.

3. The speed is about zero. If you wonder whether the speed change knob is low, find out the reason and make the speed rise again.

4. When the button switch is blocked, it can be replaced.

5. If the air pressure is lost, check whether there is steam leakage in the pipeline or insufficient air pressure capability, and replace it.

6. When the overload installation is not reset, you need to turn off the overload protection and then press reset.

7. If the slider changes the equipment switch to the "ON" position, then switch it to "OFF".

In order to avoid the occurrence of similar problems, when using the punch press, you must pay attention to safe operating regulations. At the same time, you must do a good job in maintaining the equipment and repair it on time to effectively reduce the occurrence of failures.

2. Issues to consider in the actual operation of precision punch machines

During the actual operation of the precision punch machine, in order to make the operation and the mold adapt to the actual production conditions to the greatest extent, to ensure the quality and accuracy of the stamped products, the product parts requirements specified in the drawings must be considered, and it must not only ensure that it is technically advanced and feasible It must also be economically reasonable, so during the actual operation of precision punching machines, several aspects of issues must be considered. In summary, they should mainly include the following points:

(1) Quality and specification accuracy requirements for product parts;

(2) The adaptability of product parts to stamping processing;

(3) Production batch of product parts;

(4) Conditions of precision punch;

(5) Mold manufacturing conditions;

(6) Stamping raw material characteristics, specifications and availability;

(7) Convenient operation and safe production;

(8) The enterprise management level of the factory.

It can be seen from the above that there are many problems involved in the actual operation of precision punching machines. The selection of its process methods, formulation of process plans, selection of mold types and determination of the actual structure of the mold，should not based on one or two of the above-mentioned aspects, instead we should comprehensively study the problems at all levels, and finally determine a reasonable operation plan through careful analysis and comparison. Only in this way can we ensure customers' trust in the company and the equipment, and then use our company's precision punch products with more peace of mind.