Leave Your Message
Products Categories
Featured Products

TJS- Nut Machine Series cold heading machine

1. Preparation: Install the screwdriver bit or core puller, and ensure that the power supply is plugged in and grounded.

2. Adjust the torque: Adjust the torque of the machine as needed, usually through a knob or button.

    Main technical parameters:

    MODEL

    unit

    TJS-8B-80

    TJS-10BS

    TJS-10BL

    TJS-11B

    TJS-14B

    Stons Qunty

    No.

    6

    6

    6

    6

    6

    Forming Force

    Kgs

    15000

    23000

    23000

    50000

    80000

    Max. Cut- -off Diameter

    mm

    Φ6

    Φ8

    Φ8

    Φ9

    Φ12

    Max. Cut- -off L ength

    mm

    25

    40

    50

    40

    60

    Producton Spedpcs

    Pcs/min

    60-210

    60-210

    60-210

    30-160

    50-160

    P.KO Stroke

    mm

     

     

     

    13

    15

    KO Stroke

    mm

    30

    50

    80

    40

    45

    Stroke

    mm

    80

    80

    110

    100

    140

    Cut off Die Diameter

    mm

    Φ28*50L

    Φ19*40L

    Φ19*40L

    Φ25*50L

    Φ35*60L

    Punch Diameter

    mm

    Φ20*70L

    Φ31*80L

    Φ31*80L

    Φ35*95L

    Φ40*130L

    Main Die Diameter

    mm

    Φ35*80L

    Φ46*100L

    Φ46*100L

    Φ46*100L

    Φ56*120L

    Die Pitch

    mm

    38

    53

    53

    53

    60

    Normal Sina of Bolt

    mm

    Φ2-Φ7

    Φ3-Φ8

    Φ3-Φ8

    Adjustable nut with 12mm across sides Adjustable nut with 12mm across sides

    Shank Length of Blank

    mm

    2-20

    30

    45

    Adjustable length, pipe type 5-25; Screw type 8-35 Adjustable length, pipe type 5-25; Screw type 8-35

    Main Motor Power

    KW

    7.5KW-8

    11KW-8

    11KW-8

    22KW-8

    45KW-8

    Main Motor voltage

    V

    380V

    380V

    380V

    380V

    380V

    Main Motor frequency

    HZ

    75HZ

    75HZ

    75HZ

    75HZ

    75HZ

    Main Motor speed

    r/min

    750

    750

    750

    750

    750

    Pump power

    W

    2*180W(1/4HP)

    2*180W(1/4HP)

    2*180W(1/4HP)

    2*735W(1HP)

    2*735W(1HP)

    Oil consumption

    L

    100L

    100L

    100L

     

    200L

    Volume(L*W*H)

    M

    2.6*1.3*1.6

    2.6*1.3*1.65

    2.6*1.3*1.65

    3.1*1.5*1.97

    3.8*1.7*2.4

    Weight

    Ton

    3.5

    3.6

    3.6

    5.5T

    9

     

    FAQ

    The operation method of nut machine is as follows:

    1. Preparation: Install the screwdriver bit or core puller, and ensure that the power supply is plugged in and grounded.

    2. Adjust the torque: Adjust the torque of the machine as needed, usually through a knob or button.

    3. Start the operation: Insert the screw into the nut, align the screw head with the nut hole, start the machine, and start tightening the nut.

    4. Adjust the angle: Adjust the nut tightening angle of the machine as needed, usually through a knob or button. After tightening one nut, you can adjust the angle appropriately before unscrewing the next one.

    5. Complete the operation: When all nuts are tightened, turn off the power of the machine, clean the work area, remove the screwdriver head or core puller, and store the whole machine.

    6. Maintenance: Clean the tools in time after use and keep the outside of the machine dry and clean. Regularly check whether the machine is in good condition. If it is damaged, it should be repaired or replaced in time.

    description2